PAS Releases Version 5.3 of PSS Yokogawa Interface

December 08, 2016

PAS is pleased to announce the release of Version 5.3 of the Yokogawa Import Library for PSS

  • Enhancements/Fixes:

    • Yokogawa / All point config / ZPID-E point type being recognized to import. [CAS-52567-H1V0J8  TF#15702]

  • Product Defects Resolved:

    • Yokogawa / All point config /  IOP settings: Some IOP+ & IOP- alarms are disabled in PSS but not in database or CAMS. [CAS-47494-Y4R7L8  TF#15149]

    • Yokogawa / All point config /  What is the best way for us to identify a alarm which is set to ON with a priority of Logging. [CAS-50166-X8D3Q3  TF# 15369]

    • Yokogawa / All point config/ AOF Alarms mismatch (Alarm Enable state analysis). [CAS-50662-H5Z4X7  TF# 15360]

    • Import log error "ExaQuantum CAMS Events Database with ARA Support". [TF# 15435]

  • The following import types were updated in this release

    • Centum OPC Point Configuration (CS, CS3000, XL, VP) (Full)

    • Centum OPC Point Configuration (CS, CS3000, XL, VP) (Partial)

    • Centum Project File Complete (FCS and Prosafe) (CS3000,VP) (Full)

    • Centum Project File Complete (FCS and Prosafe) (CS3000,VP) (Partial)

    • Centum VP CAMS ODB Update

    • CAMS CSV Update

    • CAMS CSV Update V5

    • ExaQuantum CAMS Events Database with ARA Support

This interface is available to all customers on support with PSS V7.3.5.4 and higher.  To acquire the software please download it from the PAS Customer Care Portal or contact Customer Care at RapidSupport@PAS.com. You may view our Technical Updates page to view the latest information regarding all PSS releases.