PAS Releases Version 6.3.0.6 of PSS Yokogawa Interface

May 04, 2018

PAS is pleased to announce the release of Version 6.3.0.6 of the Yokogawa Import Library for PSS. 

  • Enhancements/fixes:

    • Added AOF and AF parameter to interface. [CAS-55428-G5B9W9]

    • When an alarm is set of (AOF) the parameters of the point is changing from "ALM" to "ALM AOF." Updated to have Centum OPC AE import insert inferred RTNs when AOF events are encountered and interpret the AOF data properly on the standing alarm snapshot. [CAS-56924-G4T6Q9]

    • when the CAMS import is being run and alarms are being disabled in CAMS. Added User defined fields to process alarm in Centum OPC AE same as CAMS OPC AE. [CAS-59002-G7L9C3]

    • Add support for AOF changes made by SEBOL or Sequence Table logic. [CAS-59695-P4P0Q3]

    • Yokogawa standing alarm snap shot import configuration cannot connect to data collector. Added datacollector and log duplicate option in Yokogawa snapshot import setting. [CAS-54625-B9S5D9]

    • Add a log line for the tag/alarm not found and resolve index related error found in log file. [CAS-57311-Y8K8P3] 

  • The following import types were updated in this release.

    • ExaQuantum CAMS Events Database with ARA Support

    • Centum Project File Complete (FCS and Prosafe) (CS3000,VP) (Full and Partial)

    • Yokogawa Standing Alarms Snapshot Text File

    • Yokogawa CAMS OPC AE.

    • Centum OPC AE (CS, CS3000, XL, VP)

This interface is available to all customers on support with PSS V7.3.5.4 and higher.  To acquire the software please download it from the Technical Support Portal or contact the Technical Support Team at RapidSupport@PAS.com. You may view our Technical Updates page to view the latest information regarding all PSS releases.